rm cores series/type: rm 10 the following products presented in this data sheet are being withdrawn. for further information please contact your nearest epcos sales office, which will also support you in selecting a suitable substitute. the addresses of our worldwide sales network are presented at www.epcos.com/sales. ordering code substitute product date of withdrawal deadline last orders last shipments b65814n1011d001 b65814n1012d001 2003-08-08 2004-02-29 2004-08-31 b65814n1010d001 b65814k1010d001 2003-08-08 2004-02-29 2004-08-31
236 08/01 in accordance with iec 60431 cores without center hole for transformer applications rm cores are supplied in sets magnetic characteristics (per set) approx. weight (per set) gapped with center hole without center hole l/a l e a e a min v e 0,5 42 83 ? 3 470 0,45 44 98 90 4 310 mm ?1 mm mm 2 mm 2 mm 3 m 20,7 22 g material a l value nh s approx. mm e ordering code 1) -d with center hole -n with threaded sleeve -j without center hole n48 400 3 % 0,21 160 b65813-+400-a48 630 3 % 0,13 250 b65813-+630-a48 n41 250 3 % 0,44 90 b65813-j250-a41 630 5 % 0,13 226 b65813-j630-j41 1600 10 % 0,04 573 b65813-j1600-k41 1) replace the + by the code letter ?d? or ?n? for the required version. b65813 core rm 10
237 08/01 ungapped material a l value nh e a l1min nh p v w/set ordering code -j w/o center hole n30 7600 + 30/? 20 % 2720 b65813-j-r30 t38 16000 + 40/? 30 % 5730 b65813-j-y38 n49 2900 + 30/? 20 % 1040 1680 < 0,75 (50 mt, 500 khz,100 c) b65813-j-r49 n87 4200 + 30/? 20 % 1500 2550 < 2,30 (200 mt, 100 khz, 100 c) b65813-j-r87 n97 1) 4200 + 30/? 20 % 1500 2550 < 2,00 (200 mt, 100 khz, 100 c) b65813-j-r97 n41 5500 + 30/? 20 % 1960 2550 < 0,80 (200 mt, 25 khz, 100 c) b65813-j-r41 1) preliminary data b65813 core rm 10
238 08/01 coil former material: gfr thermosetting plastic (ul 94 v-0, insulation class to iec 60085: h max. operating temperature 180 c), color code black solderability: to iec 60068-2-20, test ta, method 1 (aging 3): 235 c, 2 s resistance to soldering heat: to iec 60068-2-20, test tb, method 1b: 350 c, 3,5 s winding: see ? processing notes ? , page 153 squared pins. for matching clamp and insulating washers see page 240. 12 pins sections a n mm 2 l n mm a r value ? pins ordering code 1 41,5 52 43 8 b65814-n1008-d1 10 b65814-n1010-d1 11 b65814-n1011-d1 12 b65814-n1012-d1 2 39 52 46 8 b65814-n1008-d2 frm0271-w 11,1+0,2 2 1 3 12 11 10 8 7 9 65 4 5,50,3 0,650,05 10,05 0,590,06 1+0,1 2,54 erdungspunkte 1,3+0,1 0,5 0,2 1,6 _ 0,2 13,55 _ _ 12,25 0,2 0,2 21 _ _ 12,5 0,2 10 _ 60 ground ? 1,3+0,1 hole arrangement view in mounting direction version pins omitted 8 pins 10 pins 11 pins 2, 5, 8, 11 2, 11 9 b65814 accessories rm 10
239 08/01 coil former for power applications optimized for automatic winding material: gfr polyterephthalate (ul 94 v-0, insulation class to iec 60085: f max. operating temperature 155 c), color code black solderability: to iec 60068-2-20, test ta, method 1 (aging 3): 235 c, 2 s resistance to soldering heat: to iec 60068-2-20, test tb, method 1b: 350 c, 3,5 s winding: see ? processing notes ? , page 153 for matching clamp and insulating washer 1 see page 240 sections a n mm 2 l n mm a r value ? pins ordering code 1 41,5 52 43 12 b65814-c1512-t1 hole arrangement view in mounting direction (note half pitch!) marking of pin 1 ground ? 1,3+0,1 b65814 accessories rm 10
240 08/01 clamp with ground terminal, made of stainless spring steel (tinned), 0,45 mm thick solderability to iec 60068-2-20, test ta, method 1 (aging 3): 235 c, 2 s also available as strip clamp on reels insulating washer 1 between core and coil former for tolerance compensation and for insulation made of polycarbonate (ul 94 v-0, insulation class to iec 60085: e 120 c), 0,1 mm thick insulating washer 2 for double-clad pcbs made of polycarbonate (ul 94 v-0, insulation class to iec 60085: e 120 c), 0,3 mm thick clamp insulating washer 1 insulating washer 2 ordering code clamp (ordering code per piece, 2 are required) b65814-a2203 insulating washer 1 (reel packing, pu = 1 reel) b65814-b5000 insulating washer 2 (bulk) b65814-b2005 frm0259-d 4,8 max. 0,7 x 0,45 15,1+0,3 17+0,3 0,2 0,9 _ _ 0,9 0,2 +0,1 0,3 5,2 _ b65814 accessories rm 10
241 08/01 adjusting screw tube core with thread and core brake made of gfr polyterephthalate plastic adjusting screwdriver (not shown) plastic handle for adjusting screwdriver (not shown) adjusting screw core rm 10 adjusting screw min. adjusting range % ordering code tube core material a l value nh ? length mm mate- rial color code n 48 400 4,55 6,3 n 22 red 10 b65679-e3-x22 400 630 4,98 6,3 n 22 black 18 11 b65679-e2-x22 630 5,15 6,3 n 22 white 17 b65679-e1-x22 adjusting screwdriver B63399-B1 handle b63399-b5 b63399 b65679 accessories rm 10
1 herausgegeben von epcos ag marketing kommunikation, postfach 80 17 09, 81617 mnchen, deutschland ? epcos ag 2000. alle rechte vorbehalten. vervielf ? ltigung, ver ? ffentlichung, verbreitung und verwertung dieser brosch re und ihres inhalts ohne ausdr ckliche genehmigung der epcos ag nicht gestattet. mit den angaben in dieser brosch re werden die bauelemente spezifiziert, keine eigenschaften zugesichert. bestellungen unterliegen den vom zvei empfohlenen allgemeinen lieferbedingungen f r erzeugnisse und leistungen der elektroindustrie, soweit nichts anderes vereinbart wird. diese brosch re ersetzt die vorige ausgabe. fragen ber technik, preise und lieferm ? glichkeiten richten sie bitte an den ihnen n ? chstgele- genen vertrieb der epcos ag oder an unsere vertriebsgesellschaften im ausland. bauelemente k ? nnen aufgrund technischer erfordernisse gefahrstoffe enthalten. ausk nfte dar ber bitten wir unter angabe des betreffenden typs ebenfalls ber die zust ? ndige vertriebsge- sellschaft einzuholen. published by epcos ag marketing communications, p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2000. all rights reserved. reproduction, publication and dissemination of this bro- chure and the information contained therein without epcos ? prior express consent is prohibited. the information contained in this brochure describes the type of component and shall not be con- sidered as guaranteed characteristics. purchase orders are subject to the general conditions for the supply of products and services of the electrical and electronics industry recommended by the zvei (german electrical and electronic manufacturers ? association), unless otherwise agreed. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or the international representatives. due to technical requirements components may contain dangerous substances. for information on the type in question please also contact one of our sales offices.
|
